WIRTGEN GROUP Machines Driving The Construction Of The New Istanbul Airport

 

After just three years of construction, the world’s biggest airport (measured by passenger numbers) started operation in 2018 initially with two runways, expanded to three by 2019, and by the end of the project in 2028, a total of six runways are expected. The Istanbul Yeni Havalimani, to give the ‘New Istanbul Airport’ its official name, is also the biggest infrastructure project in the history of Turkey.

 

As so often on airport job sites, WIRTGEN GROUP technologies are on the radar. The same is also the case with the developer IGA, a consortium of the five leading Turkish contractors Cengiz, MAPA, Limak, Kolin and Kalyon. These construction companies opted for a WIRTGEN GROUP fleet comprising over 50 machines and plants. BENNINGHOVEN asphalt mixing plants, VÖGELE road pavers, as well as HAMM compactors and tandem rollers for soil and asphalt compaction are responsible for getting the job site set for take-off.

 

HAMM Compactors Lay The Perfect Foundation

The earthworks for the new Istanbul Airport were a major project in itself. On this 9,000 ha site, the challenge was to create a base with a high load-bearing capacity. But, with their operating weight of 16 t, the 10 HAMM 3516 compactors, which took on the job were more than up to the task. The unbound layers of gravel and crushed stones were compacted with ease by the Series 3000 machines; these machines offer a winning combination of high centrifugal force and static linear load.

 

Strip by strip, the machines compacted the layers of material which had been placed by lorries (dumping height 30-40 cm) and spread by graders, laying the basis for an infrastructure that scores high on superlatives.

 

A key advantage of HAMM technology for earthworks includes the 3-point articulation developed by HAMM. It provides for outstanding all-terrain mobility, supporting safe manœuvring even on rough ground. It also offers excellent driving comfort, since jolts are effectively dampened.

 

 

Six BENNINGHOVEN Asphalt Mixing Plants Formed The Backbone Of The Job Site

A glimpse at the fleet of vehicles highlights the massive scale of the airport project: over 3,000 modern lorries are in use – many of them to transport material. The high-quality asphalt mix for the runway construction is being produced by 6 BENNINGHOVEN mixing plants, one each of the types TBA 3000 and TBA 4000, and two each of types ECO 3000 and ECO 4000, with mixing capacities of 240 t/hour and 320 t/hour; this corresponds to up to 1680 t/hour, depending on the type of asphalt to be produced.

 

The mix for the surface course consists of stone mastic asphalt with polymer modified bitumen. The material is used for surfaces which are subjected to heavy stresses and consists of a mix with a high proportion of aggregate, polymer-modified bitumen and stabilizing additives for the bitumen. The composition is balanced to ensure lasting resistance to deformation, producing surface courses which are robust, safe for traffic and have a long service life. All BENNINGHOVEN plants can handle such challenging production processes, including the transportable asphalt mixing plant (TBA) or the plant in container design, ECO for short.

 

‘A Big Box Of Wonders’: ECO Creates Flexibility

The BENNINGHOVEN ECO plant is a particularly suitable choice when asphalt mixing plants are required on temporary sites, such as in Istanbul. It combines cutting-edge BENNINGHOVEN technologies with a high standard of production, all within compact containers, guaranteeing maximum mobility and flexibility.

 

ECO plants can be operated as stationary units, and can also handle rapid changes of location without difficulty. Since all main components are designed in ISO standard container dimensions (20 or 40 feet), they are also easy to transport by lorry, ship or rail. Meanwhile, these high-performing plants with fixed options guarantee optimum mix quality. Another winning feature of the ECO model, as with all BENNINGHOVEN plants, is the maintenance-friendly, high-quality and long-lived components.

 

BENNINGHOVEN ECO highlights:

  • Transportable asphalt mixing plant in a container design
  • Can be set up quickly
  • Intelligent modular system
  • Easy transport
  • Compact plant
  • Low logistics cost
  • Mixing capacities from 100 t/hour (ECO 1250) to 320 t/hour (ECO 4000)

 

VÖGELE Pavers In Formation Flight

A total of 12 VÖGELE pavers are in operation, laying asphalt for the runways and a number of taxiways. In addition to the latest “Dash 3” generation of SUPER pavers (3 SUPER 2100-3), some of the paving teams are also working with predecessor models (3 SUPER 2100-2 and 6 SUPER 1900-2). These pavers have already completed thousands of operating hours, and are proof of the great longevity and reliability of VÖGELE technology. The machines are constructing the first three of a total of six runways – comprising a 29 cm base course, a 12 cm binder course and a 4 cm surface course.

 

Teamwork Increases Quality:
The Entire Fleet of 12 SUPER Pavers is Working ‘Hot to Hot’

Asphalt Paving Over An Area Of 2.2 million m²

The fleet of 12 VÖGELE pavers is equipped with extending or fixed-width screeds of types AB 600 TV or SB 250 TV. The AB 600 Extending Screeds have a basic width of 3 m and can pave at widths of up to 9.5 m when fitted with bolt-on extensions. On the airport job site, the SUPER 1900-2 Highway Class pavers operate with the AB 600 TV Extending Screed at a width of 7.5 m.

 

The SUPER 2100-2 and SUPER 2100-3 pavers are also in the Highway Class and are combined with SB 250 TV Fixed-Width Screeds. Their basic width is 2.5 m, but this can be extended to 13 m using fixed and hydraulic bolt-on extensions. On the job site, the pave width is 12 m. In this configuration, the tracked pavers work ‘hot to hot’, consistently meeting the high demands on both quality and productivity as they pave the 3,750 m or 4,100 m long and 75 m wide runways, and a number of taxiways – a total area of 2.2 million m². The joints are significantly better protected against water penetration and can withstand stresses for longer.

 

Transportable Asphalt Mixing Plant in a Container Design

HAMM Tandem Rollers Compact The Runways

A total of around 20 HAMM Series HD+ and HD tandem rollers are being used to compact the vast asphalt surfaces. They ensure rapid compaction and large area coverage thanks to the large drums. The kneading effect of the GRW 280-10 and GRW 15 rubber-wheeled rollers guarantees good surface sealing. With so many HAMM rollers in action, the runways are positively bustling with vehicles. In these circumstances, visibility is a key factor for efficient working and the avoidance of accidents.

 

To that end, HAMM rollers have excellent all-round visibility thanks to a large operator’s platform or the large all-round glazed panoramic cabin, that allows a clear view of the working area directly around the roller and the surrounding area on the job site. This visibility ensures the quality of the compacting work and a high level of safety.

 

WIRTGEN Slipform Pavers Building Concrete Taxiways

When it comes to building concrete taxiways, the IGA consortium similarly brooks no compromises, electing to use machines from WIRTGEN, the market leader in slipform pavers. Initially, two SP 500 models with dowel bar inserters, one SP 25 and one TCM 95 texture curing machine were used for the concrete paving work. They paved taxiways with a depth of 40 cm and a width of 2-6 m. However, the technology was such a sensation on-site, that the customer ordered a further ‘machine set’, comprising an SP 500 – one of the last concrete pavers of this type manufactured, and a TCM 95 from the WIRTGEN brand headquarters in Windhagen (Germany).

 

 

The SP 500, which has been a genuine WIRTGEN triumph, is being replaced by the new SP 60 series. The slipform pavers in this series are proven masters in inset and offset applications, and can be equipped with a range of options, including a dowel bar inserter. This is the case for the three SP 500 machines in Istanbul. They insert dowel bars at intervals of 38-50 cm, ensuring the correct height of adjacent slabs.

 

TCM 95 Texture Curing Machine For Optimum Texture Of The Concrete Surfacing

The WIRTGEN TCM 95 is the ideal co-pilot to accompany the SP 500 mid-range concrete paver, the new SP 60, and even the SP 90 series. The texture curing machine is equipped with an automatic spraying and brooming system. Once the surface has been broomed to the desired texture, the spraying unit applies dispersion to the fresh concrete surfacing to retard the evaporation of curing moisture, preventing stresses and the cracks this can cause. The TCM 95 is equipped with four wheeled chassis and covers working widths of up to 9.5 m.

 

For more information,
contact WIRTGEN INDIA Pvt. Ltd.

Customer Care No.: 1800 - 200 - 2600

E-Mail: sales.india@wirtgen-group.com

Internet: www.wirtgen-group.com/india